.. _sdapsclassic: sdapsclassic class ================== This is the main class which currently should be used to create questionnaires. It builds on top of the other packages and adds new macros and environments which are similar to the ones from the original SDAPS LaTeX class. Please note that the environments from the sdapslayout package cannot be used directly as using these environments will cause conflicting macro definitions. Instead one can simply use the aliases provided in this class. The entire document should be wrapped using the :environ:`questionnaire` environment. The following macros and environments exist: * :environ:`questionnaire`: Main environment wrapping everything * :environ:`info`: Style definition for information block * :macro:`\\addinfo`: Add metadata to the project * :macro:`\\sdapsinfo`: Print the standard instructions for filling out The following question types exists for your use: * :macro:`\\singlemark`: A single range or mark question * :macro:`\\singlemarkother`: A single range or makr question with an alternative answer in case it isn't applicable * :macro:`\\textbox`: A large and optionally scalable textbox for freeform content * :environ:`choicequestion`: A multiple choice question with a number of answers * :environ:`choicegroup`: A list of multiple choice questions layed out in rows (or columns) * :environ:`optionquestion`: A single choice question with a number of answers * :environ:`optiongroup`: A list of single choice questions layed out in rows (or columns) * :environ:`markgroup`: A list of range or mark questions layed out in rows (or columns) You should only use ``\section{}`` for structuring the document. Class Options ------------- =========================== ========================= Argument Description =========================== ========================= sdaps_style The markings style to use. Either "code128", "qr" (default: code128) checkmode The mode for checkbox recognition can be any of: * **checkcorrect**: check to mark, fill to correct (unmark) (default) * **check**: check or fill to mark * **fill**: fill to mark disable_recognition Disable all recognition related page markings. This must not be used when intending to ues the SDAPS program for optical mark recognition. An example use case would be creating a PDF form using the SDAPS LaTeX classes. (default: not set) twoside_barcode Where to draw barcodes if in twoside/duplex mode: * **both**: draw on front and back (default) * **front**: only draw on the front of the page * **back**: only draw on the back of the page globalid A global identifier to be printed on the document (as barcode) globalidlabel The label for the barcode (only code128) no_print_questionnaire_id Disable printing of questionnaire IDs print_questionnaire_id Enable printing of questionnaire IDs =========================== ========================= General macros and environments ------------------------------- .. environ:: \begin{questionnaire}[kwargs] content \end{questionnaire} :kwarg noinfo: Suppress the generation of the standard information text This is the main environment. You should have exactly one of these environments containing the entire document. .. environ:: \begin{info} content \end{info} A simple environment which places a line on top and below the content. .. macro:: \addinfo{key}{value} Attach further metadata to the SDAPS project. This may be used for any purpose and the information will also appear on the cover page when generating a report using the main SDAPS program. .. macro:: \sdapsinfo Print the instruction text that is printed at the top of the page unless the `noinfo` keyword argument is given to :environ:`questionnaire`. Place into a :environ:`info` block to get the same visual appearance as the default information text. .. macro:: \sdapspagemark This macro must be executed once for every page. By default it is placed into the center footer and as such should not be executed unless the footer is modified. While this command is provided, use it at your own risk. No guarantees are made on how the class uses this macro internally. If you use it, you need to verify the behaviour whenever the class is updated and ensure that everything is functioning appropriately. In particular, this macro must not be executed twice per page. Question related macros ----------------------- .. macro:: \checkbox* :arg *: If given, a single choice checkbox is shown instead of a multi choice. Shows an unchecked checkbox for demonstration purposes. .. macro:: \checkedbox* :arg *: If given, a single choice checkbox is shown instead of a multi choice. Shows a checked checkbox for demonstration purposes. .. macro:: \filledbox* :arg *: If given, a single choice checkbox is shown instead of a multi choice. Shows a filled checkbox for demonstration purposes. .. macro:: \correctedbox* :arg *: If given, a single choice checkbox is shown instead of a multi choice. Shows a filled and checked checkbox for demonstration purposes. .. macro:: \singlemark[kwargs]{question}{lower}{upper} A simple "mark" question, i.e. a range. The command does not currently allow adding an alternate answer in a way similar to the markgroup or rangearray environments. :arg question: The question text :arg lower: The text for the lower label :arg upper: The text for the upper label :kwarg var: The variable for the question (to be appended to context). :kwarg count: The number of checkboxes (default: ``markcheckboxcount``). .. sdaps:: Simplest form of a range question :sdapsclassic: \singlemark{A range question}{lower}{upper} \singlemark[count=6]{A range question with 6 answers}{lower}{upper} \setcounter{markcheckboxcount}{7} \singlemark{A range question with 7 answers}{lower}{upper} .. macro:: \singlemarkother[kwargs]{question}{lower}{upper}{other} Similar to :macro:`\\singlemark` but also takes an alternative answer. :arg question: The question text :arg lower: The text for the lower label :arg upper: The text for the upper label :arg other: The text for the other label :kwarg var: The variable for the question (to be appended to context). :kwarg count: The number of checkboxes (default: ``markcheckboxcount``). .. sdaps:: A range question with an alternative answer :sdapsclassic: \singlemarkother{A range question}{lower}{upper}{other} \singlemarkother[count=6]{A range question with 6 answers}{lower}{upper}{other} \setcounter{markcheckboxcount}{7} \singlemarkother{A range question with 7 answers}{lower}{upper}{other} .. macro:: \textbox*[kwargs]{height}{question} :arg *: If given, the textbox is scalable in height :arg height: The height of the text including a unit. If the `*` parameter is given, then this is the minimal height only :arg question: The question text, may not contain fragile content :kwarg text: The question text for the metadata. Fragile content is currently *not* supported. :kwarg var: The variable name for this textbox (to be appended to context) .. todo:: :macro:`\\textbox` should be able to handle an optional keyword argument and then allow the question text to include fragile content. .. sdaps:: A textbox :sdapsclassic: \textbox*{2cm}{A textbox which is 2cm high, not scaling up to the page size} \textbox{2cm}{A textbox which is at least 2cm high and can scale up to the page size} \textbox{10cm}{A textbox which is at least 10cm high sharing the rest of the page with the previous one} Note that the SDAPS class supports rather fancy textbox handling including textboxes around other content! .. warning:: The following examples are missing code for proper use! They mostly exist to show off the features but are not quite ready for easy consumption. .. sdaps:: Fancy textboxes, for real use additional metadata writing is required! :sdapsclassic: :metadata: % Prepare some stuff so that we can access the specialized commands more easily. \ExplSyntaxOn \let\sdapshbox\sdaps_textbox_hbox:nnn \let\sdapshstretch\sdaps_textbox_hstretch:nnnnn \let\sdapsvbox\sdaps_textbox_vbox:nnnn \ExplSyntaxOff \sdapshbox {} {3bp} { This hbox } should have the same baseline. And one can see that a hbox on the left edge is \sdapshbox{}{3bp}{ nicely aligned } with the edge. And some in a formula: $ f(x) = \frac{1}{c\,\sdapshbox{}{3bp}{box}} \sdapshstretch{}{2mm}{5mm}{40mm}{1} $ See how even the horizontally stretching box in math mode works fine and fills up to the whole width! Some complex inline content: \sdapsvbox {} {0.6\linewidth} {3bp} { \begin{tabularx}{\linewidth}{l|l|X} adsf lkasjd lksj flkjsfd & blub & gah \\ \hline asdf & & \\ \end{tabularx} This is a paragraph with more text. This is a paragraph with more text. This is a paragraph with more text. This is a paragraph with more text. This is a paragraph with more text. This is a paragraph with more text. } .. macro:: \addinfo{key}{value} Adds a bit of metadata. This metadata will for example appear on the cover page of the report. :arg key: The key to set :arg value: The value to set the key to .. sdaps:: An example showing the generated metadata :sdapsclassic: :metadata: \addinfo{Key 1}{Value 1} \addinfo{Key 2}{Value 2} \addinfo{Key 3}{Value 3} \addinfo{Key 4}{Value 4} Almost empty document, look at the metadata to see what this is about. Question Environments --------------------- .. environ:: \begin{choicequestion}[kwargs]{text} content \end{choicequestion} :param text: Text of the choice question. Fragile content is currently *not* supported. :kwarg cols: Number of columns :kwarg colsep: Spacing added on the left/right of every cell. This defaults to `6pt`. :kwarg rowsep: Extra distance between rows. This defaults to `0pt`. :kwarg var: Variable name for this question (to be appended to context). :kwarg text: Replacement text for metadata :kwarg type: the question type "multichoice" or "singlechoice" :kwarg multichoice: switch to multichoice "Choice" question mode :kwarg singlechoice: switch to singlechoice "Option" question mode The content should only contain :macro:`\\choiceitem`, :macro:`\\choicemulticolitem` and :macro:`\\choiceitemtext`. .. sdaps:: A choicequestion :sdapsclassic: \begin{choicequestion}[cols=3]{This is a choice question} \choiceitem{First choice} \choicemulticolitem{2}{Second choice with a lot of text} \choiceitemtext{1.2cm}{3}{Other:} \end{choicequestion} .. macro:: \choiceitem[kwargs]{text} A possible choice in a :environ:`choicequestion`. Will span exactly one column. :param text: The text for the choice. Fragile content is currently *not* supported. :kwarg var: Variable name for this answer for multichoice (to be appended to context). :kwarg val: Value for this answer for singlechoice. :kwarg text: Replacement text for metadata. .. macro:: \choicemulticolitem[kwargs]{cols}{text} A possible choice in a :environ:`choicequestion`. Will span exactly `cols` columns. :param cols: The number of columns to span. :param text: The text for the choice. Fragile content is currently *not* supported. :kwarg var: Variable name for this answer for multichoice (to be appended to context). :kwarg val: Value for this answer for singlechoice. :kwarg text: Replacement text for metadata. .. macro:: \choiceitemtext[kwargs]{height}{cols}{text} A possible freeform choice in a :environ:`choicequestion`. The text field will be of height `height` and it will span exactly `cols` columns. The text item can currently only be used in multichoice environments. :param cols: The number of columns to span. :param text: The text for the choice. Fragile content is currently *not* supported. :kwarg var: Variable name for this question (to be appended to context). :kwarg text: Replacement text for metadata. .. environ:: \begin{optionquestion}[kwargs]{text} content \end{optionquestion} Alias for :environ:`choicequestion` which simply sets it into ``singlechoice`` mode by default. .. sdaps:: A choicequestion :sdapsclassic: \begin{optionquestion}[cols=3,singlechoice]{This is a single choice question} \choiceitem{First choice} \choicemulticolitem{2}{Second choice with a lot of text} \end{optionquestion} .. environ:: \begin{info} content \end{info} A simple block to typeset important information differently. .. sdaps:: An info block :sdapsclassic: \begin{info} Just a block to write some information in, will have a line above and below. \end{info} .. environ:: \begin{markgroup}[kwargs]{text} content \end{markgroup} :param text: Common question for all subquestions. Fragile content is currently *not* supported :param kwags: Same as :environ:`rangearray` .. sdaps:: A group of range questions (used to be called mark) :sdapsclassic: \begin{markgroup}[align=mygroupalignment]{A set of mark questions} \markline{First question}{lower}{upper} \markline{Second question}{lower 2}{upper 2} \end{markgroup} \begin{markgroup}[align=mygroupalignment]{Another set of mark questions which is aligned to the first} \markline{First question}{a}{c} \markline{Second question}{b}{d} \end{markgroup} \begin{markgroup}[count=7,other]{Another further set of questions with an alternative answer and 7 choices} \markline{First question}{lower}{upper}{other} \markline{Second question}{a}{b}{c} \end{markgroup} .. environ:: \begin{choicegroup}[kwargs]{text} content \end{choicegroup} :param text: Common question for all subquestions. Fragile content is currently *not* supported :param kwags: Same as :environ:`choicearray` .. note:: The choicegroup environment is an alias for the :environ:`choicearray` environment. At this point the only difference is that the choicegroup environment correctly prints the header and that it creates the :macro:`\\groupaddchoice` and :macro:`\\choiceline` aliases. .. macro:: \choice[kwargs]{text} A possible choice inside inside the group. :param text: The choices (header) text. :kwarg text: A replacement text for the metadata, if set fragile content is permitted inside the `text` argument. :kwarg var: Variable name for this answer for multichoice (to be appended to context). :kwarg val: Value for this answer for singlechoice. .. macro:: \groupaddchoice[kwargs]{text} Alias for :macro:`\\choice` for compatibility. .. macro:: \question[kwargs]{text} A single question inside the group. All choices need to be defined earlier using :macro:`\\choice`. :param text: Question text. :kwarg text: A replacement text for the metadata, if set fragile content is permitted inside the `text` argument. :kwarg var: Variable name for this question (to be appended to context). :kwarg range: Specify which chekcboxes to show. Needs ot be given an **in order list** of variables (multichoice) or values (singlechoice) also allowing specifying `...` for any amount of items. .. macro:: \choiceline[kwargs]{text} Alias for :macro:`\\question` for compatibility. .. sdaps:: Example of a choicegroup environment :sdapsclassic: \begin{choicegroup}{A group of questions} \choice{Choice 1} \choice{Choice 2} \question{Question one} \question{Question two} \end{choicegroup} \begin{choicegroup}[align=something]{Another question} \choice{Some choice 1} \choice{Some choice 2} \question{Question one} \question{Question two} \end{choicegroup} \begin{choicegroup}[align=something]{Another group of questions which is automatically aligned to the previous} \groupaddchoice{1} \groupaddchoice{2} \choiceline{Question one} \choiceline{Question two} \end{choicegroup} .. sdaps:: Example of a vertical choicegroup environment also showing the "rotated" header layouter :sdapsclassic: \begin{choicegroup}[layouter=rotated,vertical]{A group of questions} \groupaddchoice{Choice 1} \groupaddchoice{Choice 2} \choiceline{Question one} \choiceline{Question two} \end{choicegroup} \begin{choicegroup}[layouter=rotated,angle=45,vertical]{A group of questions with a smaller angle} \groupaddchoice{Choice 1} \groupaddchoice{Choice 2} \choiceline{Question one} \choiceline{Question two} \end{choicegroup} .. sdaps:: Example of choice filtering :sdapsclassic: \begin{choicegroup}[colsep=2pt,singlechoice]{Please select a date} \groupaddchoice{1} \groupaddchoice{2} \groupaddchoice{3} \groupaddchoice{4} \groupaddchoice{5} \groupaddchoice{6} \groupaddchoice{7} \groupaddchoice{8} \groupaddchoice{9} \groupaddchoice{10} \groupaddchoice{11} \groupaddchoice{12} \groupaddchoice{13} \groupaddchoice{14} \groupaddchoice{15} \groupaddchoice{16} \groupaddchoice{17} \groupaddchoice{18} \groupaddchoice{19} \groupaddchoice{20} \groupaddchoice{21} \groupaddchoice{22} \groupaddchoice{23} \groupaddchoice{24} \groupaddchoice{25} \groupaddchoice{26} \groupaddchoice{27} \groupaddchoice{28} \groupaddchoice{29} \groupaddchoice{30} \groupaddchoice{31} % Note that the automatically assigned values match the choices. \question{Day} \question[range={...,12}]{Month} \question[range={2,5,...,9,28,...}]{Range} \end{choicegroup} .. environ:: \begin{optiongroup}[kwargs]{text} content \end{optiongroup} Alias for :environ:`choicegroup` which simply sets it into ``singlechoice`` mode by default. .. sdaps:: Example of a choicegroup environment :sdapsclassic: \begin{optiongroup}{A group of questions} \choice{Choice 1} \choice{Choice 2} \question{Question one} \question{Question two} \end{optiongroup} \begin{optiongroup}[align=something]{Another question} \choice{Some choice 1} \choice{Some choice 2} \question{Question one} \question{Question two} \end{optiongroup} \begin{choicegroup}[align=something,singlechoice]{Another group of questions which is automatically aligned to the previous} \groupaddchoice{1} \groupaddchoice{2} \choiceline{Question one} \choiceline{Question two} \end{choicegroup} Complex typesetting and images ------------------------------ SDAPS allows replacing the text which is exported for the metadata (i.e. what will show up in the report). This can make sense for convenience reasons, if shortened answers are sufficient for e.g. the report, but it also allows inserting complicated LaTeX expressions into the document without having to fear any issues. Apart from the advantage of having a better string in the report or similar you also get the advantage that more TeX commands can be used in the document. Usually environments like `verbatim` or `array` would not work inside an SDAPS environment, but they will work if a replacement text is specified. .. sdaps:: Example of using fragile content together with metadata text replacement :sdapsclassic: :metadata: \begin{choicegroup}[layouter=rotated]{A group of questions} \groupaddchoice[text=choice 1]{$\left( \begin{array}{cc} a & b \\ c & d \end{array} \right) + \log{\alpha}$} \groupaddchoice[text=choice 2]{Choice 2 -- \LaTeX} \choiceline[text=question 1]{\verb^Inline verbatim^} \choiceline[text=question 2]{ \begin{tabularx}{0.5\linewidth}{llX} cell 1 & cell 2 & tabularx over half the page width fit used as the question text. This cell is the X column filling the rest of the half page. \end{tabularx}% } \choiceline[text=question 3]{ \begin{verbatim}Even such things as verbatim environments work. However, verbatim does have some weird spacing issues (which can be partially solved by wrapping it into a vbox or similar). \end{verbatim} } \choiceline{Question 4 ends up unmodified in the metadata} \end{choicegroup} Variables --------- .. sdaps:: A choicegroup example using variables. Notice that the boxes in the metadata have variables named e.g. "flower_adam_alice". The first group of questions does not have a common prefix. The second group of questions has the common "flowerd" prefix. :sdapsclassic: :metadata: \begin{choicegroup}{A group of questions} \groupaddchoice[var=alice]{Choice "alice"} \groupaddchoice[var=eve]{Choice "eve"} \groupaddchoice{Unnamed choice} \choiceline[var=adam]{Question "adam"} \choiceline[var=bob]{Question "bob"} \choiceline{Unnamed question} \end{choicegroup} \begin{choicegroup}[var=flower]{A group of questions with variable "flower"} \groupaddchoice[var=alice]{Choice "alice"} \groupaddchoice[var=eve]{Choice "eve"} \groupaddchoice{Unnamed choice} \choiceline[var=adam]{Question "adam"} \choiceline[var=bob]{Question "bob"} \choiceline{Unnamed question} \end{choicegroup} .. sdaps:: A markgroup example using variables. The variable is e.g. "car_alice" and the boxes have a value assigned to them. Grouping is handled as in the previous case, adding the prefix when given. :sdapsclassic: :metadata: \begin{markgroup}{A group of questions} \markline[var=alice]{Question "alice"}{lower}{upper} \markline[var=bob]{Question "bob"}{lower}{upper} \markline{Unnamed question}{lower}{upper} \end{markgroup} \begin{markgroup}[var=car]{A group of questions with variable "car"} \markline[var=alice]{Question "alice"}{lower}{upper} \markline[var=bob]{Question "bob"}{lower}{upper} \markline{Unnamed question}{lower}{upper} \end{markgroup}